Jipad-8D智能血漿溶漿機

智能血漿溶漿機主要特征:
The main characteristics of inligent plasma soluble paste machine:
1.微電腦控制器，數字顯示溫度，振蕩頻率、時間。
1 microcomputer controller, digital display temperature, oscillation frequency, time.
2.任意設定溫度，水溫差不大于±0.2℃。
2 any set temperature, temperature difference of no more than plus or minus 0.2 DEG C.
3.智能血漿溶漿機內膽采用防菌鏡面不銹鋼，大敞口水浴便于清潔，排水管連接簡便，排水迅速。
3 inligent plasma soluble paste machine liner is made of germproof stainless steel mirror, large open water bath for easy cleaning, drainage pipe with simple, rapid drainage.
4.水循環系統，擺動功能，解凍更迅速、更充分、無瞬間溫差，不破壞血漿有效成份，以紅細胞非常安全。
The swing function of 4 water circulation system, thawing, more quickly, more fully, no instantaneous temperature difference, not to destroy the effective component of plasma, red blood cells are very safe to.
5.通用性強，適用于折疊冷凍*、平放冷凍*手工分離*、機采*，超大容積*，加溫生理鹽水，融化冷凍工細胞和冷沉淀。
5 strong versatility, is suitable for folding frozen plasma bag, horizontal frozen plasma bag, hand separated blood bag, a blood sampling bag machine, large volume blood bag, warm saline, melt the frozen cell and cold precipitation.
6.采用柔性、導熱性能良好的材料，將*和水隔離開，從而避免了*標簽脫落、*破裂、水質污染等事故的發生。
6 the use of flexible, good thermal conductivity material, the plasma bag and water are separated, thus avoiding the occurrence of plasma, plasma bag bag tag shedding rupture, water pollution accident.
7.將擺動裝置和循環水有機結合在一起，適合于血站及醫院冰凍血漿及血小板的解凍。
7 will be the swing device and the circulating water are organically combined together, for thawing in blood station and hospital frozen plasma and plaet.

上海旌派儀器有限公司
Jipad-8D
*,質保兩年,終身維護,歡迎您!

技術參數:
Inligent plasma soluble machine technical parameters:
1.產品型號：Jipad-8D
1 type: Jipad-8D
2.溫控37℃±0.5℃
2 Temperature 37 - 0.5 Deg. C
3.溫控精度±0.2℃
3 temperature control precision is + - 0.2 DEG C
4.微電腦控制，數碼顯示溫度，時間，振蕩頻率
4 microcomputer control, digital display of temperature, time, the oscillating frequency
5.加熱功率≤1200W
5 the heating power is less than or equal to 1200W
6.解凍時間≤8min
6 thawing time less than 8min
7.zui大化漿量≤8-16袋(100-200ml)
7 the maximum amount of slurry is less than or equal to 8-16 bag (100-200ml)
8.有不可移動不科研銹鋼解凍藍8只
8 can not move without medical stainless steel thawing blue 8
9.設有自動雙臂往返搖擺,振蕩頻率≤300次/分鐘（數字顯示）
The 9 is equipped with automatic arms back and forth swing, oscillation frequency is less than or equal to 300 times / min (digital display)
10.工作尺寸：400*450（mm)
The work of 10 size: 400*450 (mm)
11.外形尺寸：590*430*475（mm)
The 11 dimension: 590*430*475 (mm)
12.外形尺寸：590*430*475（mm)
The 12 dimension: 590*430*475 (mm)
13.定時范圍：0-120(min)
13 timing range: 0-120 (min)
14.電源電壓：220V50HZ
The 14 power supply voltage: 220V50HZ

上海旌派儀器有限公司
Jipad-8D
*,質保兩年,終身維護,歡迎您!

注意事項：
Plasma soluble machine inligence matters needing attention:
1:在轉速范圍中速使用,可延長儀器使用壽命.
1: used in the speed range of speed, and can prolong the service life of the apparatus.
2:儀器應放置在較牢固的工作臺上,放置平穩,環境應保持清潔整齊,通風干燥.
2: instruments should be placed on the worktable is firm, stable placement, the environment should be kept clean and tidy, ventilated and dry.
3:使用儀器前,先將調速旋鈕置于zui小位置,關振蕩開關.
3: before using the instrument, first the speed knob on the minimum position, close the oscillation switch.
4:裝培養試瓶應注意:1)均勻分布;2)密封好試瓶口
4: culture should pay attention to bottle: 1) uniform distribution; 2) good sealing test bottle
5:每次停機前,各開關應置于非工作狀態,定時器置零,切斷電源.
5: every time before shutdown, the switch should be placed in the non working state, the timer to zero, cut off the power supply.
6:要注意有腐蝕性,揮發性的使用.
6: attention to the corrosive, volatile.
7:儀器外殼應妥善接地,以免發生意外.
The 7: instrument shell should be properly grounded, so as to avoid accidents.
8:嚴禁各種液體進入機內,以免損壞主機;
8: is strictly prohibited various liquid into the machine, so as not to damage the host;
9:*不使用時,應切斷電源,擦干.
9: is not used for a long time, the power should be cut off, dry.
10:因有機械部分和皮帶的影響,剛開機時轉速可能不能達到zui高速度,開機預熱幾分鐘后,速度可達到zui高,機箱里控制線路板上有微調旋紐,可限制zui高和zui低速度.
10: due to the impact of a mechanical part and a belt, just boot speed may not reach the highest speed, warmed up after a few minutes, speed can reach the highest, a fine-tuning knob chassis control circuit board, which can limit the maximum and minimum speed.
11:因智能表對溫度控制的要求,會產生間斷加熱,這樣造成電壓的不穩定性,所以在間斷加熱時速度有所變化,屬于正常生活.
11: inligent table because the requirements for temperature control, will produce intermittent heating, thus causing voltage instability, so the speed in the intermittent heating change, belongs to the normal life.

上海旌派儀器有限公司
Jipad-8D
*,質保兩年,終身維護,歡迎您!